f.lux program for automatic adjustment of monitor brightness. How to set auto brightness on a laptop, the most common problem Changing the screen orientation
How to turn on automatic brightness on iPhone? Why does the brightness itself change on the iPhone? Auto brightness - setting the screen on iPhone and iPad so that the device automatically changes the brightness of the display depending on the amount of lighting. For example, in the sun or with a brightly lit screen, the brightness increases for better visibility, and in a poorly lit area or on the street in the dark, the brightness decreases. So the brightness on the iPhone itself changes.
Auto-brightness iOS can also last an hour on battery life, maintaining brightness on an iPhone or iPad when kept out of too much light.
Some users turn on auto-brightness, and some turn it off on their iPad or iPhone. However, auto-brightness was moved from standard display adjustments to more advanced iOS adjustments. This made some journalists think that iOS 11 lacks auto-correctness, but in reality it was simply moved.
This article clearly shows how to adjust brightness on any iPhone.
The main regulation of brightness lies with the Control Center, as always.
- Swipe from the bottom edge of the screen to activate the control center.
- To change brightness, move the brightness slider up or down.
You can also change the brightness of the iPhone through adjustments, for which you can do the following:
- Stop by “Nalastuvannya”.
- Scroll down and tap “Screen and Brightness.”
- To change the brightness of the screen, move the “Brightness” slider.
Previously, in this section it was possible to enable automatic brightness on the iPhone, but also in iOS 11, її.
Additional adjustment of brightness on iPhone and iPad
If you want to speed up the brightness of smaller sections or use the Night mode, you need to press the trim or select 3D Touch on the brightness slider.
How to increase brightness on iPhone 6S and above:
- Swipe your finger from the bottom edge of the screen to activate the center of the center.
- Press (on iPhone 6s or later models) or press and raise the Brightness slider to brighten it.
- To change the brightness of the display, move your finger up or down on the brightness slider.
- Press the “Night mode” button to turn it down or turn it off.
How to turn off or turn on automatic brightness on iPhone?
In iOS 11, auto-hide is now located in the “Universal Access” section. How to turn on automatic brightness on iPhone:
- Open the “Customization” program, go to “Basic”, and then to “Universal Access”.
- Select the “Display adaptation” item.
- Find the “Auto-Brightness” setting and turn it off or turn it off as necessary.
When adjusting the display adaptation, you will know that “Auto-brightness can drain for an hour of operation from the battery,” especially if you increase the brightness of the device at all, and then turn on the ability automatically ї corrections to change її. If your iOS 11 battery is running low or is causing other problems, then it’s probably best not to disable the auto brightness control, but instead turn it off and change other functions, such as such as geolocation and background programs.
However, auto brightness was previously in the “Screen and Brightness” adjustment section, but for some unknown reason it was moved further to access adjustment in new versions of iOS 11. Please be respectful if you You can use this function on different devices with different versions of iOS, The fragments of moving the option confuse the users and trigger the power supply to the command “Where did the auto brightness go?” Now you know!
Axis video instructions - "How to enable automatic brightness on iPhone and iPad in iOS 11":
How to change the screen brightness on iPhone to a minimum?
This technique allows you to change the brightness of the iPhone screen without standard adjustments. It also provides in-depth adjustments to iOS access for this purpose. If you use your iPhone or iPad at night, your eyes will thank you.
This includes information that is due to a glitch in the system or a cunning choice of the right moment. In fact, changing the brightness of the screen is very easy, since there are several simple adjustments that can be made to correct it.
- Open Settings → General → Universal Access.
- Go to the “Extension” section and turn up the “Extension” switch. Now display the Window Zoom overlay on top of the screen.
- Use your fingers three times on the screen to gain access to the additional zoom control overlay.
- Click the “Change” button and select the slider at the bottom of the overlay to scale as needed.
- Click “Select filter” and select “Light light”.
This function may not work on newer versions of iOS.
If you zoom with an adjusted low-light filter, you can change the brightness of the screen to anything you want by simply pressing the “Dome” button three times. I use this function every time I use my iPhone or iPad when I go to bed.
Good day!
The remaining time to get plenty of nutrition can be seen from the brightness of the laptop monitor. Particularly in demand are laptops with built-in IntelHD video cards (even more popular these days, especially since they are less accessible at a price for a large number of backers).
The essence of the problem is approximately this: if the picture on the laptop is light, the brightness increases, if it becomes dark, the brightness changes. In some situations, it’s funny, but in the end, it’s very important to work, your eyes begin to get tired, and working becomes extremely uncomfortable. What is it about earning money?
Remark! By the way, I have one article dedicated to the fleeting change in monitor brightness: . I will try to supplement this article.
Most often, the screen changes its brightness due to non-optimal driver settings. So, it is logical that you need to start with these settings.
Well, first of all, let’s not go as far as adjusting the video driver (in my case, it’s HD graphics from Intel, see Fig. 1). Please note, the video driver icon is displayed on the right hand side at the bottom (near the tray). Moreover, no matter what kind of video card you have: AMD, Nvidia, IntelHD - the icon is usually present in the tray (This is how you can go to configure the video driver through the Windows control panel) .
Important! If you do not have a video driver (or a universal one installed in Windows), then I recommend updating them using one of these utilities:
- enable maximum productivity;
- turn on the monitor’s energy-saving technology (it itself changes the brightness of most flashes);
- Turn on the extended battery life function for gaming programs.
What it looks like on the IntelHD control panel is shown in Fig. 2 and 3. Before speaking, setting similar parameters is necessary for the operation of the laptop, both as a monitor and as a battery.
Small 2. Battery power supply
Small 3. Electrical life at the edge
Before speaking, on AMD video cards the required section is called “Hardware”. Settings are set in a similar way:
- it is necessary to enable maximum productivity;
- turn on the Vari-Bright technology (which helps protect the battery charge, including the brightness control function).
Electrical life on Windows
Small 5. Select life schemes
Small 6. Change additional settings
The most important thing to do here is to go to the “Screen” section. You need to set the following parameters:
- Settings for the screen brightness tab Screen brightness level in low brightness mode- set however (as in Fig. 7: 50% each and 56% for example);
- Turn off the adaptive brightness control of the monitor (both battery and video).
Save your settings and reinstall your laptop. Most often, after this the screen begins to function as expected - without automatically changing the brightness.
Sensor guard service
Some laptops are equipped with special sensors that help regulate, for example, the brightness of the screen. It’s good or bad – there’s no discussion, we’ll try to turn on the service that monitors these sensors (and therefore turns on auto-regulation).
Well, the services are starting up now. To enter the wiki row (for Windows 7 – wiki row in the START menu, for Windows 8, 10 – press the WIN+R buttons), enter the command services.msc and press ENTER (div. 8).
Small 9. Sensor monitoring service (clickable)
After restarting the laptop, if this was the reason, the problem may arise :).
Center laptop laptop
Some laptops, for example, the popular VAIO line from SONY, have an edged panel. center keruvannya VAIO. Which center has a lot to learn from, and let us select the section “ Image brightness«.
This section has one useful option, namely the increase in the brightness of the mind and the adjustment of automatic brightness. To engage the robot, just move the lever to the engaged position (OFF, div. small 10).
Before speaking, until this option was enabled, other electrical adjustments did not help.
Small 10. Sony VAIO laptop
Note. Similar centers are available in other lines of laptop manufacturers. I recommend that you open a similar center and check the settings on the screen and electrical life in the new one. In most cases, the problem lies in 1-2 ticks.
I would also like to add that changing pictures on the screen can indicate hardware problems. Especially since the loss of brightness is not associated with a change in brightness in the area or a change in the image displayed on the screen. It’s even worse because at this hour dark, brown and other images appear on the screen (div. Fig. 11).
If you have a problem not only with brightness, but also with dark spots on the screen, I recommend that you read this article:
Small 11. Smugi and bridge on the screen
For additional information on the topic of the article - behind the scenes. All the best!
Automatic brightness control may be red, but in some cases the sensor may be turned on.
Users of Windows 8 and Windows 8.1 have repeatedly noted that the screen of their laptop or tablet appears a little dark.
The most common reason is the lack of parameters for automatic brightness control.
The presence of a brightness sensor in portable devices also guarantees the correct brightness of the display. Therefore, in such situations, it is better to turn on the automation and adjust the brightness manually.
Of course, it’s not very easy when you change the lighting level or the lifestyle mode, open the adjustments and make adjustments again, otherwise it’s not easy to pay attention to the price – this means that comfort during work is much more expensive. So, how can we bother? But it’s easy to be timid. Open and go to the “Electrical Life” section. The life cycle regime is being balanced.
We need to create a new one or switch to the “Energy Saving” mode. Let's choose another option. Click on the message “Adjusting electrical circuits” and the window has loose spots, adjust the brightness level of the screen. Once you have selected the required level of brightness, you will need to turn on the adaptive control. To press the message “Change additional life settings” in the window that opens, look for the “Screen” item and click on the plus sign to open it.
There will be two more sub-items. Select “Turn down adaptive brightness control” and set one or the other value for the “Vimk” position. Save your changes and close all windows. Now the brightness of the display may be lost to one level. If you need to change the brightness, for this purpose Windows uses the brightness tool - Mobility Center.
This article is about how to adjust the brightness of the computer screen automatically and manually. So that everything is clearly visible on the screen, you can manually increase the brightness if you are in a bright room, or, perhaps, on the street in bright sun. Or if you are in a dark room, then you can change the brightness so that your eyes don’t get strained. This will also help protect the energy and charge of the laptop battery.
In addition to manually changing the brightness, you can set Windows to automatically adjust the brightness of the screen by connecting the computer to power, equal to the battery charge, or using an ambient light sensor, such as a lot of modern outbuildings.
Manually adjusting the brightness of the laptop or tablet screen
On laptops, you can quickly increase or change the brightness using additional keys on the keyboard. They can be found in the middle of the function keys f1 - f12, which are located above the number keys. Find the key where the brightness icon is located, often just like that and press on them.
Since these keys are highly functional, you may end up pressing them next to the Fn key (removable) in the lower left part of the keyboard.
If you have such keys on your keyboard every day, or you are using a tablet, you can adjust the brightness of the screen right in the middle of the Windows OS.
For Windows 10, click on the battery icon in the notification area and click on the corresponding tile, which changes the brightness by 25% when clicked on the skin. You can do this yourself by opening the center notification on the command panel, or swiping from the right edge if you have a tablet.
You can also find this option in the settings of Windows 10. To do this, open Settings from the Start menu, select System and then Screen from the left menu. There you will find a guide that can help you change the amount of brightness.
For Windows 7 and 8, this option is found in the “Electricity” settings under the “Windows and Sound” section on the Electrical panel. At the bottom of the window, click the “Screen Brightness” adjustment bar.
You will also find this option in the Windows Mobility Center. Right-click the Start menu and select Mobility Center (Windows 10 and 8.1). For Windows 7, press the Win + X keys.
Monitor screen brightness
Everything we have discussed is mainly about devices for laptops, tablets and all-in-one computers. However, if you are using a desktop PC or a laptop/tablet with a previously connected monitor, the brightness will have to be adjusted in the monitor itself. Of course, you won’t be able to install automatic regulation.
The menu and setup of the monitor's skin model vary, so I can't give you step-by-step instructions on how to proceed. Tim, no less, you can get involved in this on your own, taking into your hands the handout of the koristuvach (a book or leaflet that came with the monitor) or without it. To do this, you just need to open and go to the menu and settings of the monitor by clicking on the buttons that are located on the monitor itself, next to the power button. These monitors can be installed on the gate.
You can also increase or change the brightness of the screen using third-party programs, such as Screen Bright or Display Tuner, without causing any problems with all monitors.
Automatic brightness change:
1) Permanently connected to power supply
On laptops and tablets, you can set the brightness level to automatically change when connecting the device to the power supply. For example, you can set the brightness to the maximum level when you are connected to a power outlet, and to a low level when connected to the battery. Windows automatically changes the brightness.
To do this, open the Power panel > Settings and sound > Electrical power supply and select “Adjusting power supply circuits”. Here you can adjust the brightness of the screen for both schemes: “Battery view” and “Grid view”.
2) Remains equal to the battery charge
You can set up automatic adjustment of the display lighting depending on the battery charge of your laptop or tablet. In Windows 10, this is called “Battery Saver”, which can be found in: Settings > System, where you need to know and click on the “Battery Saver Options” option.
In the window, make sure that the option “Automatically turn on battery saving when the battery charge level is low” is enabled and set the value you need (if you choose, the option will be activated at 20% battery charge). Unfortunately, it is not possible to set an accurate (automatic) brightness level, so select the battery icon in the settings panel or other manual methods, point it further.
3) It is important to lighten the minds
A lot of modern devices have an ambient light sensor, which adapts the brightness of the screen to the outside light, automatically increasing the brightness if you are in a bright place, and also - changing, if the minds have insufficient clarity.
Deyaki koristuvachs respect what is handy, at that time if the deeds are in vain. In any case, you can always turn on or enable this option by going to: Control panel > Equipment and sound > Electrical > Setting up electrical circuits (flow circuits, obviously). Next, select “Change advanced living settings”, then turn on “Screen” and then “Turn down adaptive brightness control”. Here you will see two options that allow you to adapt the brightness based on the current light for two schemes.
UPD with comments:
It didn't help
After updating to Windows 10, On laptops there may be a problem with automatic brightness change.
Brightness of laptop screen Windows 10 changes automatically to low And this can cause you to become disturbed.
If you are faced with this problem, after all, you have already tried vipraviti energy planі change adaptive brightness values. (If this is so, immediately go to the end of the page to point # 2 Replace the video driver), either way, start from point # 1
.
1. Vimknennya adaptive regulation
Onslaught right mouse button on "Start" "Control panel".
U "Control panel" known "Electrolife" because you have grouped images
On screen "Electrolife" known "Adjusting electrical circuits", Let's move there.
In the parameters of the life-saving schemes there is pressure "Change additional life settings".
Find out how to configure the parameters and mode active circuits the right-hander in the name of the regime will be signed [Active]. Let's omit the step and find out "Screen".
From the list that opens, we check the parameters we need. Turn down adaptive brightness control [Vimk]. (As well as between measures)
If the brightness changes, you will need to replace the video card driver.
2. Replace the video driver
Go to "Device Manager". Onslaught right mouse button on "Start"(Windows logo on the right at the bottom of the screen) and select the item from the menu. 
We know from the device manager Video adapter you can be different, but better for everything Intel(R) HD Graphic Family.
Pressing on new right mouse button and select the item. 
In the dialog box that appears after clicking, you must select the item Search for drivers on your computer
On the next screen, select the item Select a driver from the list of already installed drivers
To enable automatic brightness change, select from the list of assigned drivers Basic video adapter (Microsoft) and we are under pressure Dali for this installation. The screen may blink as if you were changing the screen part. 
Upon completion of the equipment of the device manager for the section Video adapter It's your fault that the basic video adapter is missing. 
After this, the system must stop changing its brightness.