Eset Live CD does not waste your hard drive. Live CD: stand-alone operating system. LiveCD does not waste your hard drive: you can create the image yourself

Live CD is an operating system that can be used on any type of media. This system cannot be installed on the hard drive. Most often, such disks are used to revive the computer when the operating system is installed and is likely to become corrupted.

It is important to remember that live SD can damage any operating system. Most often, users use operating systems of the Windows family. To use the “living disk”, you need to restart your computer and install it from the system.

  • computer resuscitation;
  • Vivcheniya possibilities be-what OS;
  • Cleaning the system folder;
  • Types of drivers that caused the BSOD;
  • Export driver from any OS;
  • Analysis of installations and uninstallation of unnecessary updates;
  • Ability to launch specialized tools;
  • The ability of robots from the margin;
  • Checks the system for the presence of viruses.

    • Advantages

    Live CD has a number of advantages with the original operating system. First of all, we should be aware of the ability to become addicted to absolutely any computers that have a corrupted OS installed. You can always copy or move important documents in a safe place.

    This feature, such as a LiveCD, allows you to resuscitate the installed operating system. Such importance stems from the obviousness of the acquired tools. For example, Acronis is bad. The only thing that is worth remembering is that these tools extract abuse and it would be better for ignorant traders to not abuse them.

    Most life SD cards are built into RAM. As a result, the fluidity of the operating system and installed programs will increase. In order for the operating system to be stored in RAM, its size may be small. Given the amount of RAM, the size of the Live CD can sometimes be exceeded. Moreover, on weak computers it is better to use Windows XP or 7.

    Another advantage of LiveCD is the ability to work on a computer that does not have a hard drive or a small hard drive. It should also be noted that with the help of one disk you can use any machine without fear that the installed OS will be damaged. In addition, after activation, Life CD automatically detects all device installations, such as printers, modems, etc.

    The simplicity of the wiki can be considered another advantage. The disc needs to be downloaded from the Internet, and then burned to CD. After this, you can re-enable the machine and re-enable the LiveCD. It should be noted that the navigation of most “live disks” is Russian, so the complexity of the controls is not to blame.

    Nedoliky

    Unfortunately, LiveCD has not a lot of advantages, but not a lot of them. The main problem is saving the settings of the operating system data recorded on the disk. To save changes and adjustments, you have to vikorize your additional nose. For example, a USB storage device.

    Another serious problem that can occur in a Swede is wearing CDs or DVDs. However, if carefully preserved and cleaned, smudges and cracks will soon appear on the surface of the disk. Once you're in trouble, you won't be able to get excited about the “live disk.”

    Many people value the popularity of LiveCD. This means that the operating system, written to disk, is transferred to the RAM, and sets up the configuration of the installed installation.

    Burning an image to disk

    Before you get excited about the “live disk”, hobbyists need to burn the image to a CD or DVD. Everything is stored under the operating system. It is recommended that you install the program right away so that you can record images.

    Regardless of those who rely on no cost add-ons, we recommend taking a look at Astroburn Lite. The utility can be downloaded free of charge from the website http://www.astroburn.com/rus/home. The advantage of programs is those that practically do not take up disk space.

    After launching the program, you need to go to the “Image” tab. If the tab opens, you must sign out the following actions:

    1. Select LiveCD or LiveDVD image.
    2. Change the recording speed (or rather, select the minimum speed).
    3. Select a device for burning discs.
    4. Press the button to record.

    Once the disc has been recorded and checked for errors, it is recommended to restart the computer and use the “live disc”.

    Recording a “live disc” to a USB storage device

    Some computers may experience problems such as the presence of a DVD-ROM in the computer. This means that you cannot burn to the original LiveCD. There is no need to worry, even though you can get a valuable disk from a USB drive.

    To create a backup disk, you need the WInSetupFromUSB program. Download the program best from the official website located at http://www.winsetupfromusb.com/downloads/.

    After installing and launching the program, you must sequentially exit the following actions:

    1. Select your USB device to burn a “live disc”.
    2. If the selected disk is created first, then check the box next to the "Auto format it with FBinst" field.
    3. Select the type of image to be recorded on the USB drive.
    4. Press the “GO” button to create the disc.

    After this, a valuable flash drive will be created through a bunch of hvilins.

    The idea of ​​a “living disc”

    Before you get started with the disk, you need to update the BIOS. For this purpose, you need to limit the ability to lock onto a disk or USB drive. This can be done by making additional changes. Each skin's bios is adjusted differently. At the time of downloading from the disk, a window will appear in which you need to select the desired activity.

    For a few seconds, the operating system will be affected. Please note that the call is based on the OS installed on the computer. Your visibility may be reduced depending on the system version. Business owners may be attracted to the original Windows OS.

    Please note that the Live CD contains all necessary software. After starting the system, you can go to the start menu, and then select a program to click. All connections to the device’s computer will be automatically identified by the system.

    Once a live disk is installed, computers can operate in the same way as on the installed system. The only thing that needs to be remembered is that all changes to settings and documents will have to be saved for additional storage.

    Visnovok

    The obsession with a “living disk” can lead to a lot of problems. We are currently looking into such systems to improve the efficiency of the computer. It is enough to quickly download the tools to the disk, and the operating system will be updated. In addition, live SD can be adjusted to the capabilities of any operating system.

    It should be noted that the number of live CD and DVD collections is large. Therefore, it is necessary to transform the image according to your needs. Warto note that “live disks” can be removed not only by the operating system, but also by specialized programs, such as Acronis.

    Video review of Live CD

    Hello admin! Having come across a new laptop with a UEFI BIOS, the gentleman complained that the laptop was very cluttered and froze, and asked me to update it to factory settings. But nothing came of it for me, no matter how many times I tried, the process of downloading got stuck in the middle and I had to re-enable it in an emergency. So I tried to simply reinstall the operating system, but there was no luck, at the very beginning of the installation process of Windows 8.1 a blue screen appears with a smile INACCESSIBLE BOOT DEVICE 0x0000007B or another NTFS FILE SYSTEM. If you want to check the hard drive of the laptop with the Victoria program, before you can get a new laptop from a valuable flash drive with the Victoria program, you need to enable the AHCI option in the Bios and turn on the IDE, Which laptop does not have the IDE option, but only AHCI?

    In short, I couldn’t get hold of the flash drive and I downloaded a couple of Live CDs with this program, but I can’t get hold of the laptop from them, so I’m sorry.

    In principle, you can remove the hard drive from a laptop and connect it to a simple computer, but the laptop cannot be taken apart, even if it is under warranty.

    Hello friends! For this situation, we have prepared for you a special flash drive for downloading Live CD AOMEI PE Builder 32-bit with programs for hard drive diagnostics: Victoria, HDDScan, CrystalDiskInfo 6.7.4, DiskMark, HDTune and DMDE. With the help of a flash drive, you can diagnose any hard drive of a laptop or computer.

    We are diagnosing a laptop that I know who decided to buy at a discount in a new online store. I was immediately alarmed by those who had been running the online store for only two days. The seller confirmed that the laptop was absolutely new and gave us one day for diagnostics. All day long I was convinced and asked for a quick diagnostic of the laptop just at the seller.The diagnostic result leaves us in doubt about the seller’s generosity.Details are given in the statistics!

    Download it in advance Live CD AOMEI PE Builder 32-bit. Don’t worry about 32-bit, because these flash drives can be used on any computer or laptop, and it doesn’t matter what operating system is installed on it: 32-bit or 64-bit.

    In the main window of the WinSetupFromUSB program, select the name of our flash drive.

    Put a tick on the item Auto format it with FBinst And the NTFS or FAT32 item is checked, however.

    The item is indicated by a tick Vista/7/8/Server 2008/2012 ISO And press the button that opens the explorer window.

    The explorer opens, the ISO image of the Live CD AOMEI PE Builder 32-bit is found on the computer and visible with the left mouse button, the “Open” stamp is stamped.

    The creation of the Live CD AOMEI PE Builder 32-bit flash drive begins.

    The flash drive is ready.

    We are bringing our flash drive back to the laptop and re-installing it.

    If you don’t have a brand new laptop without a UEFI BIOS, then you’ll immediately want to use a flash drive.

    If you have a new laptop with a UEFI BIOS, then you can log into the BIOS right away and it’s even easier to get started.

    We save the changes that we have made in the BIOS and re-install, enter the laptop’s backup menu and select our flash drive in the new one for backup.

    Embossed “Enter” on the keyboard.

    Select the menu Live CD AOMEI PE Builder 32-bit and press “Enter”.

    Printed "OK"

    The work table is becoming more attractiveLive CD AOMEI PE Builder 32-bit.

    Let's go to the folder Integrated Tools.

    Dad has six popular programs for diagnosing hard drives.

    1. CrystalDiskInfo 6.7.4

    2.DiskMark

    6.Victoria

    These programs must be downloaded in order to accurately determine the technical specifications of the HDD.

    CrystalDiskInfo 6.7.4

    A very simple program, supported by Russian language, will show you the SMART hard drive of the laptop and other information, for example: temperature, current and support for the transfer modes of the hard drive (SATA 3 Gb/s or SATA 6 Gbit/s), s Softness of Winchester spindle wrap, h It is necessary to turn on the hard drive and the last hour of work, as well as other information: firmware, serial number, etc.

    Based on the results of diagnosing the HDD of this laptop, we can say that it was used for about two months (396 years), although the seller confirms that the laptop is completely new. The seller also said that the hard drive on this laptop has the flexibility of a 7200 spindle wrapper about/xv, but in reality it appeared 5400 pro/xv, then more.

    Victoria

    Program Victoria is the best (in my opinion) hard drive diagnostic utility that professionals and primary users use. With Victoria's help, you can find out about the SMART (self-test result) of the hard drive, as well as the storage surface.

    On the cob deposit Standard, on the right side of the window you can see the required hard drive with the left mouse button and on the left side of the window you can see the passport data of our hard drive, then go to the tab SMART.

    Click on the button SMART and all hard drive self-test displays are displayed, if you want to learn about these displays, read ours.

    Let's go to the button Test. On the right side of the program window there is an item Ignoreі Read andpress the button Start Run a simple test on the surface of the hard drive without correcting the fixes. This test will not detect any negative or positive effects on your hard drive, but after completing the test you will know where your hard drive is located.

    This test will show how much on your HDD sector with a hard shutdown the reading time is no more than 5 ms, 20 ms, 50 ms and not very good sectors with a read shutdown 200 ms and 600 ms, the number of sectors will also be shown, the information in which could not be read (bad blocks).

    I want to say that this test on the hard drive can be run in working Windows, but the test will not be ideal, because in the system, which continuously writes information to the hard drive and through this the test results will not give a real picture .

    The result of the HDD test is clearly not perfect, but rather satisfactory for everything, so there are a lot of sectors to fill from the lock 200 ms, and two sectors were read in 600 ms

    Read our section with reporting articles about the program .

    DiskMark

    CrystalDiskMark is a popular utility that measures the speed of your hard drive, select the required drive letter (in ours, C:) and press AII, you will start testing your hard drive for productivity. there appears to be an average speed of sequential reading and writing to the hard disk with different data blocks, for a little time we get the result.

    1. Test of sequential reading and writing of large blocks of data;

    2. Vibrating test of reading and writing in 512 KB blocks;

    3. Vibrating test of reading and writing in 4 KB blocks;

    I want to say that we have a large hard drive, the test of sequential reading and writing large blocks of data to the hard drive of the current interface (SATA 6 Gb/s) is good even if it’s 120 MB/s, our version has a read speed of 99.49 MB/s s that records 94.49 MB/s, so you obviously won’t be able to fly everything on your laptop, it won’t help you to use a heavy processor and a lot of RAM. The results will happen.

    HDDScan

    This program, with its capabilities, guesses Victoria, but, obviously, does not reach it, without being surprised at how rich it should be.

    Left-click on the hard drive icon in the middle of the program window and a menu will open in which you can select the diagnostic tool you need. I marvel at the butt of the SMART hard drive.

    You can also select a test on the surface of the accumulator.

    HDTune

    HD Tune is the most popular program for working with a hard drive, it can show the speed of the HDD, scan for bad sectors (bad blocks), show the S.M.A.R.T health level.

    Tab Info shows all the functions of the storage device.

    The lower part of the window displays the firmware version, serial number, etc.

    To tab Benchmark You can adjust the speed of your hard drive.

    Tab Health- Show me health camp S.M.A.R.T.

    On the Error Scan tab, you can scan the hard drive to detect bad sectors in the graphic image. All green sectors, including good sectors, where reds are spent, then such sectors are bad blocks.

    DMDE

    A really good program for searching for and updating deleted partitions or just deleted files on your hard drive.

    It is impossible to describe the work with this program in two words, so I advise you to read our reports about it.

    How else can you get a Live CD?

    Friends, Denmark Live CD AOMEI PE Builder 32-bit based on the Windows 8.1 Enterprise operating system and even without unnecessary programs, for example.

    Application © 2024 Mobile and computer gadgets